Celect CC908-es Kurulum ve Çalıştırma Talimatları Kılavuzu - Sayfa 7

Termostat Celect CC908-es için çevrimiçi göz atın veya pdf Kurulum ve Çalıştırma Talimatları Kılavuzu indirin. Celect CC908-es 8 sayfaları.

Enter Heating Program

1). Press ③ once. 1 (indicating Monday program) will appear in the display. Also be displayed are the

currently programmed start times for the 1st heating period and the currently programmed temperature

(flashing), icon indicates 1

that the 5-day program will be modified, you have a 5+1+1 day model. (See configuration menu item 8).

2). Press ▲ or ▼ to change the displayed temperature to your selected temperature for the 1st heating

program period.

3). Press ② once (the programmed time will flash). Press ▲ or ▼ until your selected time appears.

The time will change in 15-minute increments. When your selected time is displayed, press TIME again to

return to the change temperature mode.。

4). Press ③ once, icon 2

time and set point temperature for the 2nd heating program period will appear

5). Repeat steps 3 and 4 to select the start time and heating temperature for the 2nd heating program

period.

6). Repeat steps 3 through 5 for the 3rd;4th;5th;6th heating program periods. If 4 period per day selected

in the configuration menu item 9, only 4 period can be programmed each day.

7). Press ③ once. "2" (indicating Tuesday program) will appear in the display, along with the start time

for the 1st heating period and the currently programmed temperature. If the display shows 6, indicating

that Saturday program will be modified in 5+1+1 day model.

8). Repeat steps 3 through 6 to complete Tuesday (7 day model) or Saturday (5+1+1 day model) heating

programming.

9). Continue entering each day's programming until all heating periods time and temperatures have been

entered.

10). When you have completed entering your heating program, press ④.

7days program refer to above .

REVERT TO FACTORY DEFAULT PROGRAM SETTING

Press ③ button enter into program setting. Press ▲ or ▼ at the same time for 3 seconds. Display will

show DEF blinking for 3 times and back to program setting. Press the ④ button to begin running the

factory preset program. If no keys are pressed within 20 sec, the thermostat will revert to program

operation.

CHECK YOUR PROGRAMMING

Follow these steps to check your thermostat programming one final time before beginning thermostat

operation.

1. Press button ③ to view the 1st weekday heating period time and temperature. Each time you press

button ③, the next heating period time and temperature will be displayed in sequence for weekday,

then Saturday and Sunday program periods (you may change any time or temperature during this

procedure).

Press button ④ to begin program operation.

program period (Get up) setting。If the display shows 1 2 3 4 5, indicating

program period（Go out）display，the currently programmed start