HIBLOW hp-150 Kullanım Kılavuzu - Sayfa 7
Hava Kompresörü HIBLOW hp-150 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. HIBLOW hp-150 17 sayfaları. Air pumps
Ayrıca HIBLOW hp-150 için: Kullanım Kılavuzu (13 sayfalar), Manuel (8 sayfalar)
Sayfayı Yazdır
(1) Prior to starting the work, be sure to unplug the pump.
(2) Remove all screws from the four corners, and the upper housing. If it is difficult to remove it due
tothe heavily stuck internal seal packing, pry it open by inserting the tip of a screwdriver into the
clearance between the exhaust nozzle and the upper housing .
Fig. 3
Screwdriver
inserting
position
(3) Remove the sound absorber, hold the hose band and remove the L-tube from the casing nozzle.
Then, loosen the installation screws of the casing block for removal of the latter. (Figs. 5 and 6)
Fig. 5
Screw
Sound absorber
Fig. 4
Upper housing
Fig. 6
Hose band
L-tube
Screw
(Figs. 3 and 4)
Sound absorber
Casing Block
7