HIBLOW hp-200 Manuel - Sayfa 5

Hava Kompresörü HIBLOW hp-200 için çevrimiçi göz atın veya pdf Manuel indirin. HIBLOW hp-200 8 sayfaları. Air pumps
Ayrıca HIBLOW hp-200 için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (17 sayfalar)

Sayfayı Yazdır

HP- 150 / 200

STEP

Insert the actuating rod into the machine body. Be

sure to fit the positioning boss on the diaphragm

base into the concave part of the frame stay.

Secure the diaphragm mounting block on the

other side and tighten washers and U-lock nuts

with the nut driver.

Make sure that gap between the actuating rod

and the electromagnets is even.

STEP

Mount the casing block with screws (4 screws on

each side).

And insert L-tube into the nozzle of casing A.

Then, fix it with hose clip.

Complete the other casing block in the same way.

STEP

REPLACEMENT OF SAFETY PIN

Check that the broken pin is removed from unit.

●If the broken pin is left inside the unit, it can get caught

in between electromagnets and actuating rod, which

can cause breakdown.

STEP

Insert a new safety pin through the hole on the

terminal side.

(Please Insert safety pin through the spring

electrode, L-shaped lever in such order.)

REPLACING THE CHAMBER BLOCK