Dynacore D-120R Kullanıcı Kılavuzu - Sayfa 2

El feneri Dynacore D-120R için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dynacore D-120R 4 sayfaları. Rgb pocket light

1.Turn on/off the power

Press the power key for about 2 seconds to power on or off the appliance.

2.Charging port

Type-C charging interface, input voltage DC 5V, charging time of about 3 hours.

3.Mode switch button ( three modes)

Press the button to switch the light mode, this product had four modes (CCT mode,

HSI mde, SCENE mode, RGBHW mode). For details of modes, please see the

interface.

4.Multi-function key ( CCT mode)

When the light is in CCT mode, use the multi-function key to adjust the color

temperature (2500K-8500K). Press down to increase the color temperature, press

up to reduce the color temperature.

5.Multi-function key (HSI mode)

When the light is in HSI mode, use the multi-function key to adjust the light color

and the color temperature. When pointing to H, you can adjust the luminous color

value (0-360°), press down to increase the color value and up to reduce color value.

When multi-function to the middle of the press, pointing to S, you can adjust the

color temperature (0-100), press down to increase color temperature and up to

decrease color temperature.

6.Multi-function key (SCENE mode)

There are 5 small modes in SCENE mode:

1.Warning light mode, 2.Gradient mode, 3.Lightning mode, 4.RGB flashing mode,

5.Special effect mode.

There three ABC options in the small mode. You can switch freely, please see the

interface for details.

When the light is in SCENE mode, press the multi-function key in the middle, you

can switch the light mode:

1.Warning light mode, 2.Gradient mode,3.Lightning mode, 4.RGB flashing mode,

5.Special effect mode.

Look at the instructions to adjust the ABC option, press down function forward, up

function backward.

7. Brightness adjustment knob (5%-100% brightness)

Swipe down to reduce the brightness of the re-light and slide up to increase the

brightness of the re-light.

CCT mode interface

Current brightness: the intensity of light in

a discharge state. 100% maximum, 00%

minimum.

Current color temperature: the color temperature

in a discharge state. 2500K for warm light, 10000K

for cold light.