EmergoPlus PowerXtreme XS230 Kullanıcı Kılavuzu - Sayfa 12
İnvertör EmergoPlus PowerXtreme XS230 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. EmergoPlus PowerXtreme XS230 15 sayfaları. Solar set
Sayfayı Yazdır
User manual Solar set XS
sprayer with water and detergent and then use a
squeegee to smoothen the adhesive bead.
The glue will cure by means of moisture absorption from
▪
the ambient air. Depending on the humidity, the curing
will take 1 to 2 days per mm of glue thickness.
The glue can be re-coated with most of the common
▪
automotive paint systems (also water-based). Resin-
based wet paint finish or acidic curing are not suitable.
Re-coating can also be done in wet-on-wet up to 3 hours
after the application. Adhesion op fully hardened glue can
be improved by pre-treatment with Activator.
E18-XSSolarset-EN-01
www.emergoplus.com
Page 12 of 15