HiBoost C27G-CP Kullanıcı Kılavuzu - Sayfa 4

Genişletici HiBoost C27G-CP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HiBoost C27G-CP 8 sayfaları. Cell phone signal booster kit

Outdoor antenna

. Magnetic antenna is adopted. The proposed location is about 20cm or 8inches

at the rear of the car. If you have a larger vehicle, try installing at the rear roof.

. The function of outdoor antenna is to receive the signal from the base station,

transfer it through the feeder to booster. On the contrary it transmits the signal

back to the base station from the booster.

Vehicle booster

. The vehicle booster should be hidden in the corner of the car, near the power

supply.

. The booster is a full-duplex amplifier which amplifies the signal both inside and

outside the vehicle.

Indoor antenna

- Small Patch Antenna which has 2dBi gain is adopted. The proposed location is

at 5/4 height of the glass which is shown in the installation graph. If your

vehicle is larger, the proposed location is where the signal is weak.

. The function of the indoor antenna is to transmit the enlarged signals to mobile

phones and also back to the booster.

Power supply

. 12V power supply is adopted. The vehicle charger can also work. The booster

can be directly fed by the vehicle's power.

LEDs indication

The following graph shows the ports of C27G-CP, because two bands are

supported simultaneously, the panel has 2 alarm indicators. For C27G-58, the

panel has 5 alarm indicators because it supports 5 bands. For each alarm

indicator, the status and definition is the same.

_Ae_.ﬂ._........_

1. Connect with outdoor antenna

2. Connect with the power supply

3. Connectwith indoor antenna

4. PCS alarm indicator

5. CDMAaIarm indicator