HiBoost Home 4K Kullanıcı Kılavuzu - Sayfa 9

Genişletici HiBoost Home 4K için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HiBoost Home 4K 20 sayfaları. Mobile signal booster

As you route and pull cabling, follow these general guidelines:

. Bend cables and route them smoothly, and protect the outer skin against any

damage.

- Keep horizontol cobles straight and fosten them with or tie every three to five

feet.

. Bind ond fosten verticol cobles every six to eight feet.

- Woterproof oll connectors between outdoor antenna and coaxial cables with

Wrop woterproof tape to ovoid woter or other kinds of damage.

. Be careful when plugging the connector in so as not to damage the center pins

on the connectors.

1.8 Power up your signal booster

Once all the following precoutions have been token, power on the signal

booster.

1. Verify that you have left at least 20 feet of vertical sepdrdtion spoce between

the indoor and outdoor ontennds.

2. Never point the front of outdoor ontenno towards the inside of the indoor

antenna.

5. Verify that the supplied coaxial cables from both the outdoor antenna and the

indoor antenna are properly connected to the signal booster before

powering it up.

4. Carefully plug in the supplied power adaptor into the signal booster where it

is marked 'DC 12V' and connect the other end to 0 power outlet.

The LED indicator morked power should light up green.

SIGNAL BOOSTER STATUS

Overview: The booster has 0 very smart stortup system. When you finished the

booster system installation and power on the booster. The booster will start its

initiolizotion process to check the received downlink signal from the cell site and

the isolation status, on automatic process designed to ensure its best

performance. This will take approximately 3 - 5 seconds.

After the booster starts up, please check if the coverage is good. If it is good, the

booster system installation is complete. If the coverage is not adequate, pleose

fully rereod and understand the LCD, LED indicotions, control buttons and MGC

function on your booster, as they will help you identify and solve any potential

Issues.

9/18