HiBoost Sidekick Kurulum Kılavuzu - Sayfa 9

Genişletici HiBoost Sidekick için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HiBoost Sidekick 12 sayfaları.

Sayfayı Yazdır

Step 8

Signal quality test

4 Regular Problems and 1 normal status

If the booster is working normally, no further adjustment is required

DL GAIN

OUTPUT POWER

LTE700

<60dB

CELL800

<60dB

PCS1900

<60dB

AWS2100

<60dB

DL GAIN

OUTPUT POWER

LTE700

<60dB

CELL800

<60dB

PCS1900

<60dB

AWS2100

<60dB

DL GAIN

OUTPUT POWER

LTE700

>=60dB

--/NEGATIVE

CELL800

>=60dB

--/NEGATIVE

PCS1900

>=60dB

--/NEGATIVE

AWS2100

--/NEGATIVE

>=60dB

You could do the following:

(1)First make sure the signal gauge value is unchanged from that during the outdoor

antenna installation.

(2)Do speed tests with the booster on and o , and make a comparison.

(3)Check if the number of signal bars increases.

(4)Make a phone call or send messages and check if the voice and streaming are better.

　OVERLOAD

LED LIGHT PATTERN

>=8dBm

Alarm light ashing and

>=8dBm

Power light solid red

>=8dBm

　LOOP BACK

LED LIGHT PATTERN

<8dBm

Alarm light ashing and

Power light solid

<8dBm

red(strong loop back) or

green(slight loop back)

<8dBm

　POOR SIGNAL

LED LIGHT PATTERN

Alarm light OFF and

power light solid green

REASON

Outdoor signal is too strong

REASON

Inadequate separation of

the indoor and outdoor

antennas

REASON

Input signal is too weak

SOLUTION

Have your outdoor antenna

pointed slightly away from the cell

tower

SOLUTION

1、Increase vertical and horizontal

distance.

2、Add barriers(e.g. walls)

Please try these solutions until the

gain reaches or is over 60dB.

SOLUTION

1、Try adjusting the outdoor

antenna to the best direction

2、Try adjusting the outdoor

antenna to another cell tower

3、Try increasing the height of the

outdoor antenna and make sure

there are no barriers between the

tower and the outdoor antenna

Please try these solutions until the

output power reaches or is over

-5dBm.