HiBoost SLT Pro20-5S-BTW Kullanıcı Kılavuzu - Sayfa 8
Genişletici HiBoost SLT Pro20-5S-BTW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HiBoost SLT Pro20-5S-BTW 20 sayfaları. Mobile signal booster
Sayfayı Yazdır
1.5 Install Indoor Antenna
Select a place on a wall in the area where you need better reception.
Mount the indoor antenna with the included screws as shown in the figure
below.
slide into mount
tapping screw
hook
plastic expansion
bolt
1.6 Install your signal booster
The signal booster should be mounted in an easily accessible area so it's easy to
perform general maintenance. The area is properly ventilated and not exposed
to excessive heat, moisture and/or direct sunlight. The optimal area would be on
a wall located near a power outlet. Please use a surge protector rated at a
minimum of 1000 Joules between the booster's power adaptor and the AC
power outlet on the wall.
Mount the booster with the included screws as shown in the figure below.
slide into mount
\I
\I
\
I\
I\
1.7 Run coaxial cable
Loosely run the supplied coaxial cable from your outdoor antenna to your
booster connector marked "Outdoor." We recommend applying waterproof tape
8/18