Celerity Surface Line Rotatable Series Kullanıcı Kılavuzu - Sayfa 3

Monitör Celerity Surface Line Rotatable Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Celerity Surface Line Rotatable Series 7 sayfaları. Pressure transducer display

Sayfayı Yazdır

_INTRODUCTION

1.0

1.1 FUNCTION

This manual covers the Surface Line Rotatable (SLR) Series Pressure Trans-

ducers as shown in Figure 1 below. Included herein is general information, oper-

ating specifications, installation and removal instructions, and product warratny

information.

Figure 1. Surface Line Rotatable (SLR) Pressure Transducer Displays

1.2 INTENDED USE

The SLR Pressure Transducer Display is a miniature digital transducer display

for use on 1.125 inch surface substrate. It is designed to interface (via 15-Pin D

connector) to SS2 transducers with 30 and 100 PSI full scale pressure ranges.

The SLR utilizes a 3.5 segment light emitting diode (LED) with two selectable

engineering units (PSIA and KPa) and can be rotated to be positioned at all four

quadrants. The SLR is electrically interfaced using a standard high-density 15-

pin D-Sub (HD15P) connector. The device uses externally supplied 13.0 to

32VDC excitation and outputs 0 to 5VDC or 0 to 10VDC. A 4 to 20mA, self pow-

ered (from the line and requires no external supply) device is also available.

These units require no field calibration.

p.1