GreatCo Gallery GER-36 Kullanıcı Kurulum ve Kullanım Kılavuzu - Sayfa 5

Kapalı Şömine GreatCo Gallery GER-36 için çevrimiçi göz atın veya pdf Kullanıcı Kurulum ve Kullanım Kılavuzu indirin. GreatCo Gallery GER-36 9 sayfaları.

Sayfayı Yazdır

INSTALL YOUR FIREPLACE

Wall mounting bracket and fire box installation：



Open the box and take out the wall mounting bracket.



Choose a solid and plain wall and put the bracket in the position where you want to install the fireplace. Mark the

holes with a pen using the holes in the mounting bracket as a guide (Fig. 3)



If locating the fireplace on existing wall studs or solid wood walls, Screws can be inserted at this time and you can

proceed to step 6, otherwise continue the steps below for placing wall anchors.



Take away the bracket and then, using an 8mm or ¼" drill bit, drill holes in the wall. Put the plastic wall anchors into

the holes. (Fig. 4)



Insert ST5×40 screws to secure the bracket to wall (Fig. 5)



Hang the fireplace on the hooks at top and push the fireplace into the bracket and then insert the short M5×10 screws

into the bottom support tabs. (Fig. 6)



Arrange the white & clear faux stones along the inset window ledge at the front of the firebox.



Install the fireplace front as pictured. (Fig. 7) Secure the fireplace front with 2 M4×8 screws in the tabs on top of the fire

box

Fig. 5

90237 GER-36 REV A 8-3-12

Fig. 3

IMPORTANT: Install in the

orientation shown with mounting

hooks at the TOP of bracket as

shown by arrows.

Insert M5x10 screws

Fig. 6

Fig. 4

Fig. 7