DaytonAudio HTA200BT Kullanıcı Kılavuzu - Sayfa 2

Amplifikatör DaytonAudio HTA200BT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DaytonAudio HTA200BT 12 sayfaları. 200w integrated stereo hybrid tube amplifier

Sayfayı Yazdır

Safety Information

To reduce the risk of electric shock, do not remove cover.

No user serviceable parts inside. Refer servicing to qualified

personnel. To reduce the risk of fire and shock do not expose

unit to rain or moisture. The unit should be connected to an

earth grounded AC electrical socket. The unit should be oper-

ated in a well ventilated area. Minimum clearance is 2 inches

from the ventilation openings.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(a) This device may not cause harmful interference.

(b) This device must accept any interference received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS