IGS All stars Operatör El Kitabı - Sayfa 7
Oyun IGS All stars için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. IGS All stars 17 sayfaları.
Sayfayı YazdırSolving Hopper SSR Error
After powering on the machine, if the hopper keeps working and can't be stopped,
it could be that the hopper SSR's jump setting is incorrect.
How to solve:
1. Locate the Hopper SSR jump (JP7) on the PC board. Then identify current
HOPPER SSR is at HIGH ACTIVE or LOW ACTIVE.
2. Change to use the alternative JP7 setting.
Low Active (Default)
JP7
High Active
The following example shows how to change from LOW ACTIVE to HIGH
ACTIVE.
Open pins 1 and 2
Remove the solder bridge between
pins 1-2.
3
2
1
Short pins 1-2
3
2
1
Short pins 2-3
Short pins 2 and 3.
Then apply solder to bridge pins 2-3.
5