DaytonAudio MK442 Kullanıcı Kılavuzu - Sayfa 2

Konuşmacılar DaytonAudio MK442 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DaytonAudio MK442 4 sayfaları. Dual 4" 2-way center channel speaker

Sayfayı Yazdır

Congratulations on your purchase of the Dayton Audio

channel speaker is designed to complement other Dayton Audio speakers in a

multichannel home theater system and produce balanced, natural sound with vocal

clarity that rivals much more expensive speakers. Please read on to discover how to

get the most from your new center channel speaker.

1 Parts Inventory

The MK442 speaker package includes the following items:

• 1 Dayton Audio MK442 speaker

2 Installation Tools

No tools are required for installation of the MK442 speaker. Due to its rear-

ported design, shelf placement is recommended.

3 Speaker Placement

The purpose of a center channel loudspeaker is to provide clear, intelligible

audio that is localized to the screen. The ideal location for your MK442 center

channel speaker is centered above or below your TV or projection screen. For

optimum performance, place the speaker at least 3" away from any wall or

other surface. The MK442 speaker features soft non- marking rubber feet to

allow vibration-free shelf placement.

CAUTION: The MK442 center channel speaker is compact in size, but

substantial in weight. Be sure that the shelf is anchored to the structure of

the building via a stud or drywall insert, to prevent potential damage or injury.

4 Speaker Connection

Use a good quality wire for the connection between your Dayton Audio

loudspeaker and the ampliﬁer. For longer runs, heavier wire should be used.

For proper performance in a home theater surround sound environment, all

speakers in the surround sound system must be connected correctly with

proper polarity. All 2-conductor wire is marked in some way to help you do this.

One side will be marked with a colored stripe, a raised rib, or a different colored

conductor. Use the marked side for the "red" connections.

5 Caring For Your Speakers

Clean your speakers by wiping with a damp, lint-free cloth. The ﬁnish of your

speakers can be maintained and enhanced by periodic use of a surface

protectant such as "Armor All

or brushed to remove dust and debris.

POWER RATING NOTE: Almost any speaker can be used successfully

with almost any ampliﬁer. Conversely, almost any speaker can be damaged

by almost any ampliﬁer—despite either unit's power rating. The published

power rating is accurate only if the volume level is never set above the point of

audible distortion. Distortion is an indication that the ampliﬁer or loudspeaker

is operating beyond its design limits, and damage may occur – often within

seconds. If you hear distortion, immediately reduce the volume. The MK442

is designed to be used with stereo equipment rated from 5 to 80 watts and

capable of 4 ohm operation.

Dayton Audio loudspeakers are designed to reproduce music and speech in a

home environment at moderate volume levels. When used within their limits,

Dayton Audio loudspeakers will provide many years of trouble free performance.

". The grills may be vacuumed or gently tapped

MK442 speaker. This center