DaytonAudio MKBOOM Montaj Kılavuzu - Sayfa 7

Konuşmacılar DaytonAudio MKBOOM için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. DaytonAudio MKBOOM 10 sayfaları. Mkboom bluetooth powered speaker kit

Sayfayı Yazdır

17. Remove the 2 black jumpers from pins 1,2 and 5,6 from the 6 pin "Volume Control" connector on the KAB-250v4

2 x 50W Class D Audio Amplifier Board with Bluetooth 5.0.

Tip: The connectors on the on the KAB-250v4 amplifier are labeled on the back of the board.

18. Remove the 4 Conductor Cable from the KAB-BE 18650 Battery Extension Board. This will be used in the next step.

19. Following the guide below, connect all of the cables from the mounting plate to the KAB-250v4 2 x 50W Class D

Audio Amplifier Board with Bluetooth 5.0. Work with one cable at a time to try to prevent getting the wires tangled

together.

Note: The 5-pin Aux In connector and Power Led connector need to be plugged into the same 10-pin jack as

shown below.