GAI-Tronics 12576-502 Kullanıcı Kılavuzu - Sayfa 7

Telefon GAI-Tronics 12576-502 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. GAI-Tronics 12576-502 13 sayfaları. Desktop access panels

Model 12576-502 & 12576-50215 Desktop Access Panels

Attaching the Front Panel

After all adjustments have been completed, place the bottom enclosure on the top enclosure, being careful

not to pinch any cables. Secure the rear enclosure using the four screws provided.

Keypad Labels

The keypad on the enclosure uses "slide-in" labels to identify

the individual switch functions. Two sheets of blank labels

are included with the access panel. (GAI-Tronics Part. No.

14919-113).

The labels are printed by inserting the blank sheets into any

laser jet or inkjet printer. A Microsoft Word document

(Version 97) is available to create custom labels. It is

available for download at

Industrial Communications.

Follow the ADVANCE /SmartSeries link, and select "Access

Panels."

http://wwwgtccom/indcomsystems/smartseries/ss_access_pa

nels.htm

NOTES

1. To modify the text size and color of the text in the

blocks, you must "unprotect" the document. Do not re-

protect the document; otherwise all the information that

was typed in will be lost.

2. Before printing on the included slide-in labels, print a

test page on plain paper to verify that the positioning, the orientation, and the information are correct.

To check the printed paper, lay it behind the included slide-in label sheet and verify that the print is in

the proper location. Because printers vary, you may need to adjust the margins in the page setup to

center the printed text within the perforated strips.

Install keypad slide-in labels as follows:

1. Separate the slide-in labels along the perforated lines on the sheet.

2. Fold the tab at the end of the slide-in label so that it is perpendicular to the rest of the label.

3. Slide the label into the appropriate slot opening located at the top of each of the button columns.

4. Repeat the above steps for the remaining labels.

To remove the keypad slide-in labels, proceed as follows:

1. Locate the tab at the top of the label and pull it out from behind.

2. Slide the label out using the tab that has been exposed.

e:\standard ioms - current release\42004 instr. manuals\42004-732l2c.doc

07/14

www.gai-tronics.com

under

Pub. 42004-732L2C

Page 7 of 11

Figure 8. Keypad Button Layout