Automatic Systems TriLane TL2 Hızlı Başlangıç Kılavuzu - Sayfa 3
Turnikeler Automatic Systems TriLane TL2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Automatic Systems TriLane TL2 11 sayfaları. Tripod turnstile
Sayfayı Yazdır
p. 3/11
3. GENERAL SYMBOLS
The following symbols are used in this manual or as labels on the equipment:
This symbol is used to highlight a tip that may help you to better understand the product.
This symbol is used to highlight an important instruction for the correct use and/or maintenance of the
product.
This symbol is used to highlight a risk of electric shock or electrocution.
This symbol is used to highlight a risk of cutting yourself.
This
(Either in the form of an affixed label or directly engraved on a mechanical part)
This symbol is used to indicate the tool required for the relevant operation.
This symbol indicates that the equipment conforms to European standards and directives.
This symbol indicates that the equipment must be disposed of in accordance with the applicable
European Directives (DEEE 2012/19/EU).
TL2P
Model
xx/xx/18
Mfg Date
kg
1
Phases
Hz
230
Volts
A
E/TL2P/002
Item
18-TL2P-B0000
Serial
SN
MADE IN BELGIUM
www.automatic-systems.com
4. GENERAL
4.1. GENERAL CONDITIONS OF USE
Your TriLane tripod turnstile has been designed to operate in any kind of climatic environment from -10°C to +50°C,
with up to 90% of relative humidity.
4.2. PACKAGING
In most cases, your turnstile will be delivered in a cardboard box attached to a wooden pallet.
A bag containing the keys and attachments for the last arm is attached to one of the turnstile arms.
The last arm is located inside the turnstile, under the cover.
4.3. UNPACKING
When the equipment arrives on-site, please check that it is complete and in good condition.
If for some reason damage has occurred during transport, please check that the transport document is in good
condition and, where necessary, report the incident to
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose
other than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic
Systems. The document is subject to change without notice.
symbol
is
used
to
65
50/60
Product identification label showing the equipment type, the production
2
date, the voltage, the weight and the serial number and the reference code.
TL2-QSG-EN-03
identify
the
principal
Automatic
Systems.
ground
connection
point.