GAI-Tronics 354-001RD Kullanıcı Kılavuzu - Sayfa 10
Telefon GAI-Tronics 354-001RD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. GAI-Tronics 354-001RD 12 sayfaları. Nema 4x industrial telephone
Sayfayı Yazdır
Pub. 42004-489D
Model 354-001 Series NEMA 4X Industrial Telephone
Page 10 of 10
User Instructions (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains, among other information,
the FCC registration number and ringer equivalence number (REN). If requested, this information must be provided to the telephone
company. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN's on
the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the
REN's should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determine by the
total REN's contact the telephone company to determine the maximum REN for the calling area. This equipment cannot be used on
the telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs. If this equipment causes
harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be
required. If advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in
its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service.
If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the
network until the problem is resolved. This equipment uses the following USOC jacks: RJ11CIt is recommended that the customer
install an ac surge arrester in the ac outlet to which this device is connected. This is to avoid damaging the equipment caused by
local lightening strikes and other electrical surges. This equipment is Hearing-Aid Compatible (HAC). The telephone Consumer
Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to
send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page
of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the
message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number
provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)
User Instructions (Canada) CP-01, Issue 8, Part I: Section 14.1
NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain
telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment
Technical Requirements document (s). The Department does not guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to
certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user
to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the
equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines
and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural
areas.
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority,
or electrician, as appropriate.
CP-01, Issue 8, Part I: Section 14.2
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum
number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not
exceed 5.
f:\standard ioms - current release\42004 instr. manuals\42004-489d.doc
01/15