GAI-Tronics GAI-TRONICS 670-801-EX SmartSeries Manuel - Sayfa 5

Amplifikatör GAI-Tronics GAI-TRONICS 670-801-EX SmartSeries için çevrimiçi göz atın veya pdf Manuel indirin. GAI-Tronics GAI-TRONICS 670-801-EX SmartSeries 17 sayfaları. Smartseries amplifiers for cenelec zone 1 and ul div. 1

Sayfayı Yazdır

Pub. 42004-615L2

Model 670-801-EX and 670-801-UL SmartSeries Amplifiers

Page: 5 of 15

Block Diagram

Figure 5. Model 670-801 Block Diagram

As shown on Figure 5, P1 is the 16-pin male connector located on the back of the Base-16 PCBA. It

plugs into the socket located inside the cast aluminum enclosure. The socket provides connection to the

multi-party cable containing the page/party lines and ac power.

The Base-16 PCBA conducts ac power to the Bias Power Supply PCBA through connector J6 and

receives +5 V dc and +/-15 V dc in return. The Base-16 PCBA uses the bias supplies and also passes

them (as well as control, monitoring, and line signals) to the FSK Modem PCBA via J1, a 24-pin stacking

connector. Connector J2 on the Base-16 PCBA connects the speaker transformer for the station's external

speaker, and J3 connects optional external devices.

\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-615l2.doc

6/97