GReddy Turbo Kit Emanage Ultimate Kurulum Kılavuzu - Sayfa 15
Otomobil Aksesuarları GReddy Turbo Kit Emanage Ultimate için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. GReddy Turbo Kit Emanage Ultimate 18 sayfaları. 2003 mazda rx-8 (13b-msp) t618z 10cm2 (actuator type)
Sayfayı Yazdır
2. Install the O2 sensor to the down pipe
adapter and install the adapter to the Turbo
using provided gasket and hardware. Connect
the O2 sensor connector.
3. Connect the Air Pump hose to the down pipe
adapter. Bend the hose so that it will not
contact the turbine housing. Re-use the stock
gasket.
4. Secure the Down Pipe Adapter to the
transmission with the provided bracket.
5. Reinstall the Catalytic converter, exhaust
system, and the cross member in the order
they were removed using the factory gaskets.
6. Reinstall the transverse member.
7. Cover the Air pump hose with provided wire
loom and connect the hose for the AIR control
valve.
8. Connect the AIR control valve hose and the
connector.
(Parts Used #3, 47, 66)
(Parts Used #63)
(Parts Used #20)
(Parts Used #53, 56)