Celestron 11068 Hızlı Kurulum Kılavuzu - Sayfa 2

Teleskop Celestron 11068 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Celestron 11068 4 sayfaları.

Quick Set-up Guide [cont]

Slide StarPointer finderscope onto

mounting platform as shown above.

Tighten screws located on side of

StarPointer to secure.

Insert silver barrel of 25mm eyepiece

into the diagonal as shown above.

Tighten silver screw (inset) to secure.

Before you begin viewing, please

remember to remove tube lens cap.

Before you can begin observing, you must setup your hand control,

align your finderscope and align your telescope. Step by step

instructions are included in the following Hand Control Setup action.

Insert silver barrel of diagonal into the

visual back as shown above. Tighten

silver screw to secure.

To power up telescope, you will first

need to insert batteries. Remove battery

cover on fork arm base as shown above.

While observing, tube should be

positioned as shown above.

Tighten silver screw on the diagonal to

secure in place.

Place AA batteries (user supplied) inside the

battery compartment located at the base

of the fork arm and replace battery cover.

In order to get the best view through the

telescope, slowly turn the focus knob until

the objects are in sharp focus.

Focus

Knob