Dynalink RTA210 Hızlı Kurulum Kılavuzu - Sayfa 8

Ağ Yönlendiricisi Dynalink RTA210 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Dynalink RTA210 15 sayfaları. Dynalink adsl router quick setup guide
Ayrıca Dynalink RTA210 için: Hızlı Kurulum Kılavuzu (14 sayfalar)

Sayfayı Yazdır

STEP 5

SAVE CONFIGURATION AND CHECK IF THE ROUTER IS ONLINE

Go to Tool > Save Configuration. Click on Save. Next go to Tool > Reset Router.

Make sure the "Reset to factory default settings" box is NOT ticked. Click

Restart.

CAUTION - if you reset to factory default the configuration for New Zealand

and everything you entered will be lost. It is then necessary to follow Section

5 of this Guide to reconfigure the router.

When the router restarts the DSL light on the front panel turns solid, normally

within one minute. This indicates the router has already established a link to

the telephone exchange and will authenticate using your Internet account

information. Subject to successful authentication you are online. The DSL

light blinks as data gets through.

If nothing happens return to Step 4. Scroll down to the bottom of the page

and click Connect to connect immediately. Soon after you should observe

data getting through.

Any time you want to check that the router is online, go to Status > Connection

> ATMPVC. Under Status, it should show Active. The public IP assigned by

your ISP is displayed under NAT IP. The picture below shows the router has

been assigned 210.86.78.50. If you cannot go online see Q2 in Section 6 -

Troubleshooting.