HID FARGO DTC ii Plus Kullanıcı Kılavuzu - Sayfa 8
Yazıcı HID FARGO DTC ii Plus için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HID FARGO DTC ii Plus 15 sayfaları.
Ayrıca HID FARGO DTC ii Plus için: Bakım Kılavuzu (11 sayfalar)
Sayfayı Yazdır
Powering
Trusted Identities
1.4 Technical specifications
Term
Function
Print Method
Dye Sublimation / Resin Thermal Transfer
Print resolution
300 dpi (11.8 dots/mm); continuous tone
Colors
Up to 16.7 million colors / 256 shades per pixel
Print Ribbon Options
Full-color with resin black and overlay panel, YMCKO* (500 prints)
Full-color half-panel with resin black and overlay panel, YMCKO* (850 prints)
Full-color with two resin black panels and overlay panel, YMCKOK* (500 prints)
Full-color with fluorescing, resin black panel and overlay panel, YMCFKO* (500 prints)
Full-color with fluorescing, two resin black panels and overlay panel, YMCFKOK* (400 prints) Full-color half-panel
with two resin black and overlay panel, YMCKOK* (500 prints)
Full-color half-panel with two resin black and two overlay panels, YMCKOK* (500 prints) Resin black and overlay
panel, KO* (1250 prints)
Dye-sublimation black and overlay print, BO* (1250 prints) Resin black
(standard and premium) (3000 prints)
Resin green, blue, red, white (1000 prints) Resin
silver (2000 prints)
Resin gold (1000 prints)
Rewrite technology – No ribbon is required
* Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin
Black, O=Overlay, F=Fluorescing Resin
8 seconds per card (KO*)
Print Speed
24 seconds per card (YMCKOK*)
Print speed indicates an approximate batch print speed and is measured from the time a card feeds into the printer to
the time it ejects from the printer.
Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is
dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the
print.
* Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin
Black, O=Overlay, F=Fluorescing Resin
Card Size and Types
CR-80 (3.375" L x 2.125" W / 85.6mm L x 54mm W)
Supported
Accepted Standard
CR-80 edge-to-edge (3.36" L x 2.11" W / 85.3mm L x 53.7mm W)
Card Sizes
Accepted Card
.009" - .040" / 9 mil – 40 mil/.229mm – 1.016mm
Thickness
Accepted Card Types
Input Hopper Card
200 cards (.030"/.762 mm)
Capacity
PLT-05151, A.0.R
Press polished PVC
◼
Laminated PVC (credit card construction)
◼
Blank white chip/mag
◼
Dual interface MC and/or Visa
◼
12
FARGO® DTC®ii Plus
User Guide
August 2020