HID HDPii Plus Kullanıcı Kılavuzu - Sayfa 19

Yazıcı HID HDPii Plus için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HID HDPii Plus 20 sayfaları. High definition card printer/encoder

HID HDPii Plus Kullanıcı Kılavuzu
HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
3.2
Selecting the Configuration tab
Figure 2 - Configuration
Step
Procedure
Select the Configuration tab.
1
Under Optional Printer Features, select features by clicking a check box.
The Default setting is checked.
If checked, upon Configuration tab activation, the Driver retrieves the installed Printer
features information from the Firmware and automatically checks the appropriate
check boxes for Dual Sided, Lamination and Magnetic Encoder.
If checked, the Dual Sided, Laminator, and Magnetic Encoder checkboxes are read
only.
If checked and no Printer is found or bi-directional capabilities are disabled or
unavailable, the error message (shown) is displayed.
If unchecked or cleared, feature check boxes become active and can be manually set.
If the Driver is reinstalled, it resets to the default of checked.
Under Event Monitoring, select events to be monitored. (Note: The Driver prompts
the User when the selected events occur.)
Under Set Language for Printer LCD Display, select a language.
Note: See the following sections for Event Monitoring and Language Set.
December 2012
© 2012 HID Global Corporation. All rights reserved.
Page 19 of 103