808 canz plus SP888 Hızlı Başlangıç Kılavuzu - Sayfa 2
Konuşmacılar 808 canz plus SP888 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 808 canz plus SP888 2 sayfaları.
Sayfayı YazdırStep 5: Play music
Using the speakerphone
Set your device's volume for music to
This speaker has a built-in
50%.
microphone, so you can use it
for phone calls as well as music.
Note: This is to make sure the sound from the
Your phone will ring through the
speaker isn't too loud when you start streaming.
speaker when you're receiving
Start playing music or other audio
a call.
on your device. Within seconds, the
To answer/end the call: Press the
speaker starts streaming the audio
wirelessly via Bluetooth.
button on front of the speaker.
Note: Make sure you're close enough to the
speaker's built-in microphone so that the
other person can hear you!
To adjust the volume of your audio: Use the volume
IMPORTANT: Not all phones support
playback control and phone answer/end
controls on your phone.
control. Check your phone's user manual for
more information if you're having trouble
with these functions.
Using the Aux In input
Speaker back
Use a 3.5mm audio cable (not
included) to connect the audio
output from your device to the LINE
LINE IN
IN audio input on the speaker's back
panel.
The speaker automatically switches
MIC
to the AUX IN audio, and the PAIR
indicator on the front of the speaker
PAIR
M
turns off.
To listen to Bluetooth audio again, unplug the cable from the
speaker's LINE IN jack. The speaker will try to reconnect to
PAIR
M
the last Bluetooth device.
Tour of the speaker
Front
DC IN
CHARGE
PAIR
M
button has two functions: (1) it turns the speaker on and off
(press and hold) and (2) puts the speaker into pairing mode
(short double-press) to connect to a new Bluetooth device.
PAIR indicator shows the speaker's pairing/connection status:
• fast blinking blue while pairing
• slow blinking blue while reconnecting
• solid blue when paired
• off when the LINE IN jack is in use or when the speaker's off.
button answers or ends calls on a Bluetooth-connected
phone.
MIC is the built-in microphone for using the speaker as a
speakerphone.
Back
LINE IN
DC IN
CHARGE
LINE IN jack lets you connect an audio device directly to the
speaker using a 3.5mm audio cable.
DC IN jack connects to the provided USB charging cable to
plug the speaker into a power source or adapter.
CHARGE indicator shows the charging status of the speaker:
• solid red while charging
• off when fully charged
If you have any questions about this product,
visit 808Audio.com or call our toll-free help line
at 1-800-732-6866.
QUICK
START
GUIDE
SP888 QSG 00