dB MA-2000.1D Kullanıcı El Kitabı - Sayfa 7

Araba Amplifikatörü dB MA-2000.1D için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. dB MA-2000.1D 20 sayfaları. Mono amplifier class d

S t a n d a r d w i r i n g d i a g r a m

Connect the speaker cables from the positive and negative terminals of the speakers to the respective outputs of the ampliﬁer

terminal marked with SPEAKER, as shown at the diagram. To connect the power wire supply it is necessary to use special power

cables. The fuse is placed in the holder and ﬁxed in the cable cut. One end of the cable is connected to the positive terminal of the

battery, the second one – to the ampliﬁer terminals marked with + 12V. Be sure to use a fuse with the parameters suﬃcient for use

in the system.

The length and diameter of the grounding cable must conform to the length and diameter of the cable + 12V. Connect

one end to the negative terminal of the battery and the other end of the grounding cable to the terminals marked with

GND.

Caution!!! The minimum permissible connection load impedance is 1 ohm.

For models MA-350.1D, MA-450.1D, MA-800.1D, MA-1500.1D, MA-2000.1D the operating voltage is 9-15 V.

M A - 3 5 0 . 1 D , M A - 4 5 0 . 1 D , M A - 8 0 0 . 1 D , M A - 1 5 0 0 . 1 D

M A - 2 0 0 0 . 1 D