Dynalite DUS804C-DALI Kurulum Kılavuzu - Sayfa 4

Aksesuarlar Dynalite DUS804C-DALI için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dynalite DUS804C-DALI 4 sayfaları. Ceiling mount universal sensor

Sayfayı Yazdır

specifications

DUS804C-DALI:
Standard Sensitivity
Maximum detection range: 5.0m
Detection Area: up to 7.4m x 5.6m rectangular
(at a height of 2.4m)
Detection speed: 1.0m/s
Detection object: 700mm x 250mm
Detection zones: 64
LED activation indicator
Sensor: Quad element pyro-electric
PE Cell
Range <5 lux to >5000 lux (reflected)
Automatic "Daylight Harvesting" mode
All dimensions shown in mm.
DUS804C-DALI Installation Manual Rev A.doc. Specifications and design subject to change without notice. Philips Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921). All rights reserved. Dynalite,
Dimtek, DyNet and DLight and associated logos are the registered trademarks of Dynalite Intelligent Light Pty Ltd. Not to be reproduced without permission.
4
DUS804C-DALI Installation Manual Rev B.docx
WARNING:
wires to mains power. DALI wires are NOT SELV and
should never be considered touch safe. Basic
insulation or higher is required between DALI wires
and mains cabling.
Email
Controls
Walk test/ LED indicator
Service switch
DALI power Consumption
9mA Max @ (Total of 10 user interfaces on one DALI
universe)
Control Bus
DALI bus for use with Philips Dynalite multi master
controller only
Terminals
5 way removable terminal strip, 1 x 1.5mm
individual conductor size
Operating Environment
o
o
0
C to 40
C ambient temperature
0% to 90% RH non condensing
Dimensions
72mm diameter x D 37mm
Weight
Packed weight 0.116kg
DALI power consumption
9mA (Total of 10 user interface on one DALI
universe)
Do not connect any DALI terminals or
Web: philips.com/dynalite
2
max