Gree 13-04686 Kullanım Talimatları Kılavuzu - Sayfa 14
Klima Gree 13-04686 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gree 13-04686 20 sayfaları.
Sayfayı Yazdır
Controls
Starting YourAir Cond itioner—DigitalControl
Lights next to the touch pads on the air conditioner control panel indicate
1
ON/OFF Pad
Turns air conditioner on and off.
2
Display
1. Under ON status without timer setting,
the operation mode is Auto, Cool,
Energy Saver or Dry mode, and the set
temperature will be displayed.
2. Under ON status without timer setting,
the operation mode is fan mode and the
ambient temperature will be displayed.
3. Time will be displayed under timer
setting or timer preview.
3
Temp Increase ▲ Decrease ▼
to set temperature when in Cool ,Energy
Saver or Dry mode.
4
Timer Increase ▲ /Decrease ▼ Pads
Each touch of the Increase ▲ / Decrease▼
pads on the unit will set the delay time
when using the Timer pad on the unit
The Set light will flash while setting.
5
Fan Speed Pads
Use to set the fan speed to Low, Med,
High or Auto on the unit.
the selected settings.
6
Mode Pad
Use to set the air conditioner to Cool,
Energy Saver , Fan Only , Dry. or Auto
mode.
7
Timer Pad
Timer ON can be set under off state of
unit. If timer ON reaches, the system will
run under previous setting mode. The set-
ting range is 0.5~24hr
Timer OFF can be set under on state of
unit. If timer OFF reaches, the unit will
turn off. The timer can be set in 0.5 hour
increment below 10 hours and in 1 hour
increment for 10 hours or above.
PadsUse
8
Filter check Pad
After fan rotates for 250h totally, lamp of
cleaning filter is on to remind customer
clean it.
Note: When user cleaned the filter, press
Filter check button to clear the operation
time. Meanwhile, the warning indicator
will turn off.
9
Sleep Pad
Press this button to go into the SLEEP
operation mode. Press it again to cancel
this function. This function is available in
COOL, Energy Saver or DRY mode to
maintain the most comfortable tempera-
ture for you.
14