Automation Dr. Nix QNix 1500 Kullanım Kılavuzu - Sayfa 9
Ölçüm Cihazları Automation Dr. Nix QNix 1500 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Automation Dr. Nix QNix 1500 12 sayfaları. Coating thickness gauge
Sayfayı Yazdır
statistical evaluation on your PC is optionally available.
For further information concerning "Data Processing" please
refer to the software.
Possible Display Information
1. Fe
= Measurement on steel or iron substrates
2. NFe = Measurement on non-ferrous metallic substrates
3. ERR = Incorrect handling
4. INFI = Incorrect substrate, e.g. measuring beyond the
measuring range or measuring on wood
5. BAT = Battery is getting weak, please exchange.
Information: the measured values will remain
stored.
6. bloc = Displayed alternating with the block number
7. End = Memory or block capacity out of space
8. N
= a) alternating with Fe or NFe
b) alternating with Ae
9. Ae
= Average value measured in the active block
10.
= Maximum value measured in the active block
11.
= Minimum value measured in the active block
Accessories
The electronic coating thickness gauge QNix® 1500 is
delivered with a carrying case containing Fe and NFe zero
plates, a 9 V alkaline battery, two probe protection rings and
Instruction Manual.
= number of measurements
= number of measurements of the active block
9