Gainlab Audio EMPRESS GL-PEQ Manuel - Sayfa 5

Stereo Ekolayzer Gainlab Audio EMPRESS GL-PEQ için çevrimiçi göz atın veya pdf Manuel indirin. Gainlab Audio EMPRESS GL-PEQ 14 sayfaları. 2x3 band tube equalizer

Sayfayı Yazdır

POWER SWITCH

The unit is switched on with the switch marked POWER. Set the switch

labeled POWER to the up position if you want to turn on the unit. Set the

switch labeled POWER to the down position when not in use.

Due to the tube design of the device, it is advisable to leave a "warm-up

time" of 15-20 minutes before starting use.

ATTENTION! the switch labeled POWER puts the device in standby mode, does not

completely disconnect it from the mains, if you want to disconnect the device

completely from the mains, unplug the device from the mains or switch oﬀ the

main switch at the IEC socket !

EQ IN, BYPASS

In BYPASS mode, the device galvanically connects its outputs and inputs,

so we can always check the sound of the compression compared to the

original signal. To select the BYPASS mode, set the switch to the lower

position. To select the EQ IN mode, set the switch to the upper position.

TUBE BOOST

By using this function, the gain of the output tube ampliﬁer can be

increased, and the device adding more harmonic distortion to the signal.

This can makes the resulting sound warmer and more powerful. Set the

switch to the up position to activate the function. Set the switch to the

down position if you do not want to use the function.

2X3 BAND TUBE EQUALIZER

! 4