Gainsborough H502 Hızlı Başlangıç Kılavuzu

Dış Mekan Işığı Gainsborough H502 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Gainsborough H502 3 sayfaları.

Pk2 Solar Dancing Flame Lanterns
H502
v001: 19/04/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Before using first time
Remove the protective film from the solar panel. Allow lamp to charge for at least 8 hours in full sunlight
with the ON/OFF switch in the ON position. The ON/OFF switch is located under the solar panel. Once the
batteries are fully charged, set the ON/OFF switch to ON. If the lamp does not turn on after dark refer to
Maintenance section.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
Charging and Operation:
Set switch (located on the top of solar panel case) to "ON" position. Press the ON/OFF button to "ON"
position. Charge the solar product by placing it under direct sunlight for at least 8 hours.
The light will work automatically. It will charge under direct sunlight during the day time and illuminate at
night.
NOTE: In order to test the lights simply cover the solar panel with your hand and light should turn on
automatically.
Always position in direct sunlight.
Dimensions
15.5 x 15.5 x13cm
REALISTIC FLICKERING FLAME EFFECT
36 LED'S IN EACH LANTERN IN A WARM AMBER
COLOUR
SOLAR POWERED
AUTOMATICALLY ILLUMINATES AT NIGHT
ADDS A WARM AND RELAXING GLOW TO YOUR
GARDEN AT NIGHT
THE LOOK OF A REAL FLAME
USE ON A TABLETOP OR HANG USING THE
INTEGRAL HANGER
LEDs not replaceable.
Battery: 1 x AA 1.2V 200Mah, Ni-MH, rechargeable