Hiddenbed Regal Queen Montaj Talimatları Kılavuzu - Sayfa 9

İç Mekan Mobilyaları Hiddenbed Regal Queen için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Hiddenbed Regal Queen 12 sayfaları.

FINAL ASSEMBLY

With locks (A9) ready, lift bed into desk position and lock in place.

Fasten both locks with #8 5/8" PH screws (C).

Cardboard spacers will hold desk in vertical position.

When bed is in locked position, ensure spaces between bed frame and stop

& lock are equal on both sides. To center bed frame between stop & locks,

push from outside of bed gable until spaces are even.

Unlock locks and pivot into bed position (Caution: Bed will be heavy!)

Using #8 5/8" PH screws (C), fasten 4 angle brackets (D) to last slat on each

end of bed frame, then fasten angle bracket to bed side.

(See picture on previous page)

Pivot bed into desk position and fasten slat covers to slats using #8 3/4" PH

screws (F). Cardboard spacers will hold desk in vertical position.