Hiddn coCrypt B Selfkey Kullanıcı Kılavuzu - Sayfa 3

Modem Hiddn coCrypt B Selfkey için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Hiddn coCrypt B Selfkey 5 sayfaları.

Sayfayı Yazdır

5. Enter the old PIN code and press

6. Enter the new PIN code (equal length) and confirm with

7. The display shows "Confirm:". Enter the new PIN code once more and confirm with

8. The display shows "Changing PIN".

9. The display then shows "PIN changed" followed by "Connect to computer".

10. Let the coCrypt B power off by itself or power off by pressing

11. Restart the coCrypt B in the normal way. Make sure you have a copy of your new PIN code stored

in a secure place.

E. Change Device Name:

1. Press and hold

2. Release the

for a

"1.System Info".

mom

for a

3. Press

twice. The text "3. Set name" will appear in the display.

ent

mom

ent

4. Press

to confirm your choice. The display will show the text "PIN: "

5. Enter the correct PIN code and confirm by pressing

6. The display will now show "Pin accepted" followed by "Enter dev name" followed by the current

device name/number.

7. Remove the old name by repeatedly pressing

8. Enter your new device name by repeatedly pressing on the appropriate buttons until the right

letters appear. Note that you may choose between small and capital version of each letter as

well as numbers. Delete any incorrect letter/number by pressing

9. You can make a space in your text by quickly pressing

10. When finished, confirm by pressing

11. Normal operations can now continue.

F. Erase Data:

The Erase Data command will erase the media key in your Key card (SIM-card) and generate a new

one. Any data encrypted with your coCrypt B device will be cryptographically erased and cannot

be recovered. However, the PIN code is not erased and will remain the same after the erase

operation.

1. Press

to power on your coCrypt B.

2. Press and hold the

3. Press

several times until the message "Erase data" is displayed.

4. Then press Enter

5. Press

. The "Y" for Yes is displayed. Press Enter

6. The display shows "PIN: ". Enter your PIN number and press

7. The display shows "Device erased".

8. All data on your coCrypt B is now erased and you may begin the processing of storing new data, using

the same PIN number as previously recorded.

CC01-UM-B01-02.12-ENG-01.12.16

to confirm. The display shows "New PIN".

while momentarily pressing

when the text "Admin menu" appears in the display followed by the text

until the message "Admin menu" is displayed.

. The display will change to "Confirm [Y/N]".

for at least 2-3 seconds.

to power on.

until the display is blank.

twice.

for a

mom

ent

to confirm.