Gainsborough Solar Boy & Girl Water Feature Kullanım Talimatları - Sayfa 2

Dış Mekan Çeşmesi Gainsborough Solar Boy & Girl Water Feature için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Gainsborough Solar Boy & Girl Water Feature 3 sayfaları.

Sayfayı Yazdır

Solar Boy & Girl Water Feature

Please read and retain these instructions for future reference

To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging

garden stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the

stake first then gently insert the rest of the stake into the base. DO NOT push directly against the solar

cell or the ornament housing containing the actual LED light.

Find an ideal Place for the Solar Light.

Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The

number of hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the

light is placed in a shaded area, it will not be able to fully charge and its illumination time will be limited.

Do not place the light near other outdoor lighting like porch or streetlights. These may fool the sensor

and keep the light from coming on, or cause it to turn off automatically

INSTALLATION:

1. Attach the pump to the solar panel before use, plug the hose into the outlet of the pump. Make

sure the water level covers the pump.

2. Plug the power line of the pump into the plug of the solar panel, and then fasten.

3. Position the solar panel in full sun to optimally run the pump, the backup battery will be charged

from the solar panel during normal operation and automatically run the pump without direct

sunshine.

4. If required the pump can be run by the battery in times of low sunlight. Turn on the switch at

located at the back of the solar panel, if the battery is fully charged the pump will start to work

immediately.

CHARGING AND OPERATION

1. Turn the switch, which is located under the solar panel, to "ON" position

and the battery will work automatically. Charge the solar product by

placing it under direct sunlight for at least 8 hours. Recommend longer

charging time for the first use. If the switch is "OFF" the battery will not

work, solar panel ensures the pump works directly.

2. The light will work automatically.

The pump/fountain function will work best when fully

HOW TO USE:

charged under direct sunlight.

will power the fountain water and light for a minimum of a few hours.

Care and Maintenance Recommendations

1. Clean solar panel with a soft sponge every couple of weeks.

2. Make sure all connectors are still tight and no water getting in.

3. Keep the water clean during the summer keep topping up every 3 or 4 days with clean water.

K254

When there is no sun, the built-in batteries

Instructions for Use

v001: 27/09/21