Agrimate AF 4000NK Kullanıcı Kılavuzu - Sayfa 2
Böcek Kontrol Ekipmanları Agrimate AF 4000NK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Agrimate AF 4000NK 16 sayfaları. Vehicle mount type
Sayfayı Yazdır
1. This machine has a control box, so the machine can be placed in the back of an open bed truck and
operated by a passenger in the vehicle.
2. Start-up is simple
The 12V DC battery of the truck is used by connecting it to the control box. Then you simply press the
start and fuel button at the same time, and the machine will start.
3. Durability of the machine
This machine is made almost entirely of Stainless Steel (chemical tank, fuel tank etc), which prevents
corrosion due to chemical, and fuels.
4. It is not necessary to use additional battery because you can use the battery of the vehicle.
5. Little Heat Generation
The machine has been designed so it is cooled by two air-intake valves that are connected to the fuel
ignition part of the machine. This allows the machine to remain cool during use.
6. Strong Igniter
The igniter uses a 12V DC battery so that starting the machine is quick and easy.
7. Easily Repaired
All components are designed for easy assembly/disassembly, the fuel line is made of a transparent
material. And the spark plug is easily seen, so it is easy to spot problems when they happen.
1. Items to check before using
a. Make sure fuel and chemical caps are tightly closed (The machine will not operate if they are not)
b. Make sure the connecting wires are tightly connected to the main body. (main body connector,
power connector, chemical coupling etc.)
c. Open fuel valve and chemical adjustment valve on the machine.
2. How to start-up
a. Turn on power by flipping power switch up, red light is on the power lamp should come on.
b. To start the machine, hold the start button down while continuously pumping the fuel button. It is
operating when the green light appears on the control box.
c. If it does not operate, press the start button repeatedly until it in makes a 'vroom' sound which
means combustion is occurring in the carburetor.
d. Repeat steps a to c, until it starts.
3. How to spray chemical
a. Flip chemical switch up after the machine is started.
b. Adjust the spray to the right amount of the chemical by using the chemical adjustment valve.
4. When you are finished using the machine
a. Flip the chemical spray switch down.
b. You should wait for about 10 seconds.
c. And flip the fuel button down.
d. Open the chemical tank cap.
5. What to do when use is complete
a. Clean the heat pipe with the cleaning rod. Insert the rod then turn it in a clockwise motion, in order
to prevent damage to the machine.
b. If carbon has collected in the spark plug, take out the plug and remove the carbon. (When
replacing the plug make sure it maintains a 2-3mm gap)
MACHINE FEATURES
HOW TO USE
2