DB Drive G7 250.4 Kullanıcı Kılavuzu - Sayfa 8

Amplifikatör DB Drive G7 250.4 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DB Drive G7 250.4 14 sayfaları. Competition grade

C) REM ( REMOTE CONNECTION )

Run a remote turn on cable from the head units remote switched + 12V output.

3-3. G7 +12V, GROUND, REMOTE CONNECTION DIAGRAM

3-4. SPEAKER CONNECTION

DB Drive recommends to use a minimum of 12 gauge speaker connecting cables. Run 12 gauge

speaker connecting cables from your speakers to G7 amplifier's mounting location. Keep

speaker cables away from power cables and G7 amplifier's input cables. Use grommets

anywhere the cables have to pass through the holes in the metal frame or sheet metal. Connect to the

speakers according to the type of the terminals on each speaker. Strip 3/8" of insulation from the

end of each cable and twist the cables strands together tightly. Make sure there are no stray

strands that might touch other cables or terminals causing a short. Crimp spade lugs over the

cable ends or tin the ends with solder to provide a secure termination. Connect the cable ends to

G7 amplifiers as shown on speaker system diagrams.

3-3C

Remote turn on

3-3A

12V

BATTERY

3-3B

Ground