Hideaway Concelo CRL160D Kurulum Talimatları - Sayfa 5

Çamaşırhane Aletleri Hideaway Concelo CRL160D için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Hideaway Concelo CRL160D 5 sayfaları.

13mm Euro screw (8pcs)

Runner Installation

TIP: For new kitchens, where possible, it is easiest to place the

carcase on a bench for installation of the runners.

Step 1 - For each runner align the template with the top and front

edge of the carcase.

Step 2 - On each side mark the 4 side mount (GREEN) holes

through the template.

Step 3 – Remove the template and drill 5mm holes 13mm deep at

each location.

Step 4 - Secure runners using the 13mm Euro screws provided.

NOTE: If the unit is to be positioned higher in the cabinet trim

the required amount off the top of the template. Trimming the

template will adjust the mounting hole positions for both the

collar and runner installation so they remain correctly aligned.

The maximum amount that can be trimmed off is up to:

CRL160 - 40mm.

HIDEAWAY NEW ZEALAND

09 426 7456 / [email protected] / www.hideawaybins.co.nz

HIDEAWAY AUSTRALIA

1800 042 642 / [email protected] / www.hideawaybins.com.au

Concelo Laundry CRL160D

Runner Installation Sheet

Read all instructions before installing this bin unit.

Failure to install the bin correctly may void warranty.

Left hand runner

and mount

Top edge

of carcase

Front edge

of carcase

NOTE: Cabinet shown lying on left side.

Right hand runner

and mount