DynaMetric Call Saver Pro TMP-636 Kurulum Talimatları

Ölçüm Cihazları DynaMetric Call Saver Pro TMP-636 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. DynaMetric Call Saver Pro TMP-636 2 sayfaları. Telephone recording & playback kit

Sayfayı Yazdır

Installation Instructions for Call Saver

The CSP-2 Telephone Recording & Playback Kit lets you to record and play back to

your telephone from your PC using the included Call Saver

636 Telephone Recorder Patch connects to the telephone via the modular handset

connector as detailed below.

INSTALLATION INSTRUCTIONS

Unplug the coil cord from the base of the phone and plug it into the Handset jack on

the TMP-636.

Plug the short cable from the TMP-636 into the phone base where the coil cord was

plugged.

Insert the 3.5mm GREEN stereo plug into the speaker or headphone jack on the

sound card.

Insert the 3.5mm PINK stereo plug into the MIC jack on the sound card.

Insert the Call Saver Pro disk into your computer's disk drive and follow the

automated instructions to install the software on your PC.

FOR LEGAL USE ONLY

www.DynaMetric.com

The CSP-2 is a Kit Consisting of:

1 TMP-636 Telephone Patch

1 CSP CD

1 Software Registration Code

CSP-2 Telephone Recording & Playback Kit

Pro™ software. The TMP-

Page 1 of 2

Pro™

5-20-09