AutomationDirect IRON HORSE GSD5-240-10C Kullanıcı Kılavuzu - Sayfa 8

DC Sürücüler AutomationDirect IRON HORSE GSD5-240-10C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AutomationDirect IRON HORSE GSD5-240-10C 16 sayfaları.

Sayfayı Yazdır
Installation and Wiring (continued)
Wiring Diagrams
GSD5-240-10C Basic Wiring Diagram
Min
Max
Inhibit
P2
Pin
orange white
red
P1
1 2 3 4 5 6 7 8 9 10 11
motor
armature
GSD5-240-10C Reversing Wiring Diagram
-Armature / -Field (P1-4)
+Armature (P1-5)
VAC Input (N) (P1-10)*
VAC Input (L) (P1-11)*
GSD5-240-10C
* AC1 (P1-11) terminal is internally fused;
AC2 (P1-10) terminal is NOT internally fused.
Add external fuse for AC2 if it is connected
to a hot AC line.
Page 8
IR
Cur
Accel
Comp
Lim
Customer Installed
Speedpot
(factory provided
with 8-inch leads)
* Field terminals are used for shunt-wound motors only!
Do not connect these terminals when using permanent-magnet motors.
field*
AC input **
** AC1 terminal is internally fused; AC2 terminal is NOT internally fused.
chassis
Add external fuse for AC2 if it is connected to a hot AC line.
ground
AC1* (L)
IronHorse GSD5 DC Drives User Manual – 1st Ed, Rev E – 05/13/2020
Customer supplied
4PDT Center-off
Center-Blocked switch
(GSDA-MREV shown)
Arm1
AC2* (N)
Arm2
Direction 1 (forward or reverse)
OFF (no wire terminal)
Direction 2 (reverse or forward)