Celestron PowerSeeker 80 Hızlı Kurulum Kılavuzu - Sayfa 2

Teleskop Celestron PowerSeeker 80 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Celestron PowerSeeker 80 2 sayfaları. Celestron powerseeker 80: quick setup

Sayfayı Yazdır

Quick Set-up Guide [cont]

Locate the counterweight bar and

counterweight. Slide the counterweight half

way down the counterweight bar and tighten

the locking screw to secure in place.

The longer cable should attach to the Right

Ascension axis and the shorter cable attaches

to the Declination axis as shown above.

Reattach both wingnuts and tighten to secure

in place.

Locate the finderscope. Remove the knurled

nuts on the threaded posts at the focuser end

of the telescope tube.

For additional magnification, you can use the

included 3x barlow. Place the barlow in the

focuser in place of the eyepiece - remove the

cap from the barlow.

Thread the threaded end of the counterweight

bar into the Dec axis of the equatorial mount.

Before mounting the tube, remove the two

wingnuts on the tub rings.

Loosen the set screw on the focuser so that it

does not obstruct the inner diameter of the

focuser. Insert the diagonal and tighten set

screw to secure in place. Remove plastic cap.

Orient the finderscope so that the large lens is

facing towards the front of the tube. Place

finderscope over the posts on the tube and

tighten it down with the knurled nuts.

Place the eyepiece into the barlow and tighten

the set screw to secure in place.

Slide the chrome end of the slow motion

control cables onto equatorial mount gear shaft

and tighten set screw to secure in place.

Place the tube on the mount by lining up the

screws with the mouting holes on the mount.

The dec cable should be extending towards

the focuser end of the telescope tube.

Insert the chrome barrel of the 20mm eyepiece

into the focuser and tighten the set screw.

Remove the lens cap from the front of the

telescope. To observe, look through the

eyepiece as shown above.

For detailed usage

information please

consult your owner's

manual.