8BitMods MemCard PRO Kullanıcı Kılavuzu - Sayfa 7

Depolama 8BitMods MemCard PRO için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 8BitMods MemCard PRO 15 sayfaları.

WiFi & Remote Features

1. MemCard PRO can connect to your local wireless network

and allow you to change its hardware settings and manage

the card's state and storage remotely. In order to connect

your MemCard PRO to your local wireless network for the

ﬁrst time, please follow the instructions below.

2. With a microSD card plugged in and MemCard PRO

connected to your console, power up your console and

wait until MemCard PRO shows the default screen on its

display (Fig. 1).

3. Using a Computer or Mobile device (phone or tablet),

bring up the Wireless Networks. You should see a new

network available in your area, called "MemCardPRO-

(serial number)". Select it to connect to it.

4. Once you select the MemCard PRO access point, it will ask

you for a password. The password is

5. Select OK or Connect. Your device should connect to the

MemCard PRO access point.

6. Open your default Web Browser, and navigate to the

following URL: http://192.168.4.1

7. You will be greeted by the WiFi Setup Wizard. Follow the

instructions on your screen to complete the setup and

connect your MemCard PRO to your wireless network.

mcpadmin

Page 7

8. On the ﬁnal step the device will automatically restart after

you click the button. The MemCard PRO access point will

disappear and your device should connect back to your

local wireless network. If this doesn't happen, please

manually re-connect to your wireless network.

9. After the card ﬁnishes restarting, it should be connected to

your wireless network.

10. To access the WebUI, you need to ﬁnd MemCard PRO's

assigned IP address ﬁrst. You can easily see this by

pressing and holding down the left physical button on

MemCard PRO. The display will change to show the

assigned IP address. Write this down somewhere

convenient, and use it to access the WebUI from any device

connected to the same network as your MemCard PRO.

For example, if your MemCard PRO's IP address was

"192.168.1.230", open a web browser on a computer or

mobile device, and type it in the address bar like "http://

192.168.1.230/"

11. If you did everything right, you should be looking at the

home page of the MemCard PRO WebUI.