Celestron SKY PRODIGY 102 Hızlı Kurulum Kılavuzu

Teleskop Celestron SKY PRODIGY 102 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Celestron SKY PRODIGY 102 4 sayfaları.

ITEM: #22090

Your SkyProdigy includes:

optical tube, fork arm, pre-assembled

tripod, Computerized Hand Control,

hand control holder, star diagonal,

two eyepieces, StarPointer finderscope,

accessory tray, battery holder,

documentation, including an owner's

manual, and The SkyX First Light Edition

astronomy software.

All three legs should be the same

length to provide a level platform for

the telescope. A bubble level is in-

cluded (inset) to assist in leveling.

Hold the telescope fork arm and

place the bottom of the base inside

the tripod mounting platform as

shown.

Assemble tripod by spreading the

legs out until the center leg brace is

fully extended.

Place accessory tray on top of

center leg brace by lining up the

grooves on the tray to the post on the

brace.

Thread the coupling screw into

the hole at the bottom of the fork arm

base. Tighten screw to secure the

fork arm.

102

QUICK SET-UP GUIDE

Extend tripod legs 6 to 8 inches by

loosening the tripod leg locking knob,

pulling the leg to desired length and

retightening knob.

Once grooves are aligned, turn

accessory tray until it snaps into clips

on each leg brace.

Rotate the tube clamp so that the

camera is pointed straight up.