AutomationDirect prosense TTD-20-N40160F-H Kullanım Talimatları Kılavuzu - Sayfa 5
Ölçüm Cihazları AutomationDirect prosense TTD-20-N40160F-H için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AutomationDirect prosense TTD-20-N40160F-H 6 sayfaları. Measured signal converter for temperature sensors
Sayfayı Yazdır
7 Operation
After power on, the unit is in the Run mode (= normal operating mode).
Response of the analog output in case of a fault:
Value below the set measuring range
Value above the set measuring range
Value below or above the detection
zone of the sensor
8 Scale drawing
Dimensions in mm
1: Connection for voltage supply and output signals
2: Connection for temperature sensor
The output signal falls to min. 3.8 mA.
The output signal rises to max. 20.5 mA.
The output signal falls to min. 3.5 mA
25
M12x1
LED
M12x1
2
18
5