DB Industries ExoFit Kullanıcı Talimatları - Sayfa 3

Güvenlik Ekipmanları DB Industries ExoFit için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. DB Industries ExoFit 8 sayfaları.

PUTTING ON THE HARNESS:

A Pick up the harness by the back D-ring (1). Ensure the straps are not twisted.

B Pass arms through the shoulder straps (2) keeping the chest strap (3) with

quick connect buckle to the front.

C Draw the leg straps (4) between the legs and connect the respective quick

connect buckles by inserting the tab of each buckle into its' socket. You will

hear a click when the tab engages. Pull the free end of the strap (5) away

from the buckle to make a snug fit around each thigh. To loosen the leg strap,

pull the yellow plastic part of the buckle away from the leg to allow the strap

to pull through the buckle. To release the buckle, press the silver-colored

tabs (7) on the buckle towards each other with one hand, while pulling on

the buckle tab with the other hand.

D Fasten the chest strap (3) by inserting the tab into the socket of the quick

connect buckle. You will hear a click when the tab engages. The Chest strap

should be 150mm down from the top of shoulders. Pass excess strap through

the loop keepers. The strap may be tightened to a snug fit by pulling the free

strap end to the left (away from the buckle). To loosen the chest strap, pull the

yellow plastic part of the buckle away from the body to allow the strap to pull

through the buckle. To release the buckle, press the silver-colored tabs (8)

on the buckle towards each other with one hand, while pulling on the buckle

tab with the other hand.

E Adjust shoulder straps (2) to a snug fit by pulling excess strap through the

parachute buckles (6) on each side of the harness.

The ExoFit™ harness is also available with an integral work positioning

belt with side D rings, which are for work positioning purposes only to

EN358.

Recommended Accessories: EN341 Descender, EN353 Guided Type Fall

Arresters, EN534 Lanyards, EN355 Shock Absorbers, EN360 Fall Arrest

Devices, EN363 Fall Arrest Systems, EN362 Connectors