Celestron TABLETOP 76 31034 Manuel - Sayfa 7

Teleskop Celestron TABLETOP 76 31034 için çevrimiçi göz atın veya pdf Manuel indirin. Celestron TABLETOP 76 31034 9 sayfaları.

Celestron TABLETOP 76 31034 Manuel

8. TELESCOPE MAINTENANCE

With proper care your telescope should rarely need any maintenance work.
A. When not in use, always replace all lens covers to keep dust and contaminants off the optical surfaces.
B. A small amount of dust on any optical surface is ok. If the dust builds up then use a can of compressed
air and then a camel's hair brush to remove the dust.
C. If the mirrors need cleaning, they should be cleaned by a professional. Either have your instrument
serviced by a telescope repair facility or return it to the factory.
D. Collimation or alignment of the optical system is done at the factory before shipment. There is no
adjustment you can make and if the instrument is dropped or very roughly handled, it will have to
returned to the factory for proper alignment.

SPECIFICATIONS

Optical System:
Aperture:
Focal Length:
F/ratio:
Focuser
Standard Oculars (or Eyepieces)
NOTE: Specifications are subject to change without notice.

9. OPTIONAL ACCESSORIES

Celestron International offers a wide assortment of optional accessories to expand your interests.
A. Sky Maps (#93722) - Invaluable when learning the night sky. They include all the constellations with
the brighter deep-sky objects. On the front cover is a rotating planisphere which indicates when specific
constellations are visible.
B. Flashlight - LED (#93588) - Uses a red LED to allow reading star maps and locating telescope
accessories and controls without ruining you night vision.
C. Eyepieces - A whole assortment of .96" eyepieces are available to give you a wide range of
magnifications.
D. Planisphere & Planet Guide (#93720)  Simple and easy to use to find your way around the sky.
Available in various latitude ranges  30 º (20 - 40 º ), 40 º (30 - 50 º ), 50 º (40 - 60 º ).
Newtonian Reflector (with corrective lens built in)
76mm (3")
600mm
f/8
Rack and Pinion - .96"
.96". size
8