HiDow Wireless Tens/EMS Systems Kullanım Kılavuzu - Sayfa 6
Fitness Ekipmanları HiDow Wireless Tens/EMS Systems için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. HiDow Wireless Tens/EMS Systems 13 sayfaları. Wireless device
Sayfayı YazdırRound RECEIVERS - The CHANNELS
There are 2 RECEIVERS in each HiDow WIRELESS Tens/EMS system. One is programmed as
CHANNEL 1 and the other as CHANNEL 2.
CHANNEL 1 or CHANNEL 2 are each independently controlled in INTENSITY and MODE FUNCTIONS
by the REMOTE and:
By Pushing C on the remote you change from (Receiver) Channel 1 to (Receiver) Channel 2
You can use either CHANNEL 1 or CHANNEL 2 or use both CHANNEL 1 and CHANNEL 2 at the same
time.
CHANNEL 1 or Channel 2 will appear in the LCD screen as 1 or 2.
CHANNEL or RECEIVER CONTROLS
The input receptacle for the recharger is on the side of the RECEIVER. The RECEIVER has to be
charged to work.
There is an On/Off button on each RECEIVER. When you push it ON a light comes on, and when you
push it OFF the light goes off.
MODES – Pre-Programmed MODE FUNCTIONS
M (MODES 1, 2, 3, 4)
The MODES are pre-programmed into the 2 RECEIVERS. So when you change from Channel 1 to
CHANNEL 2 you can control each RECEIVER MODE FUNCTIONS independently.
Simply push the M button to change from MODE 1 Mode 2 Mode 3 or Mode 4.
The MODE FUNCTION being used will appear in the LCD screen as 1,2,3,4.
6