Automationdirect.com Productivity 2000 P2-08ADL-2 Manuel - Sayfa 2
I/O Sistemleri Automationdirect.com Productivity 2000 P2-08ADL-2 için çevrimiçi göz atın veya pdf Manuel indirin. Automationdirect.com Productivity 2000 P2-08ADL-2 8 sayfaları. Analog input
Sayfayı Yazdır
General Specifications
Operating Temperature
0º to 60ºC (32º to 140ºF)
Storage Temperature
-20º to 70ºC (-4º to 158ºF)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side Isolation
1800VAC applied for 1 second
Insulation Resistance
> 10MΩ @ 500VDC
Heat Dissipation
1200mW
Enclosure Type
Open Equipment
UL 61010-1 and UL 61010-2-201 File E139594, Canada & USA
Agency Approvals
CE (EN 61131-2 EMC, EN 61010-1 and EN 61010-2-201 Safety)*
Module Keying to Backplane
Electronic
Module Location
Any I/O slot in a Productivity2000 System
Use ZIPLink Wiring System or removable terminal block (not
Field Wiring
included). See "Wiring Options" on page 5.
See the "EU Directive" topic in the Productivity Suite Help File.
EU Directive
Information can also be obtained at:
www.productivity2000.com
Terminal Type
18-position Removable Terminal Block
Weight
100g (3.5 oz)
*Meets EMC and Safety requirements. See the D.O.C. for details.
2
www.productivity2000.com
Input Specifications
Input Channels
8
Module Signal Input Range
0–10 VDC
Resolution
13-bit
Data Range
0–8191 counts
Input Type
Single-ended (1 common)
Resolution Value of LSB
0–10 VDC = 1.22 mV per count (1 LSB = 1 Count)
Maximum Continuous Overload
±100VDC
Input Impedance
>150kΩ
Filter Characteristics
Low Pass, -3dB @ 500Hz
6.25 ms per channel
Sample Duration Time
(does not include ladder scan time)
All Channel Update Rate
25ms
Open Circuit Detection Time
Zero reading within 100ms
Accuracy vs. Temperature
±75PPM / ºC maximum
Conversion Method
Successive approximation
0.5% of range
Maximum Inaccuracy
(including temperature drift)
±0.036% of range
Linearity Error (end to end)
Monotonic with no missing codes
Input Stability and Repeatability
±0.024% of range
Full Scale Calibration Error
±0.097% of range
(including offset)
Offset Calibration Error
±0.097% of range
Max Crosstalk
4 counts / 0.048% of range
External 24VDC Power Required
24VDC (-20% / +25%), 30mA
Tech Support 770-844-4200