Gait up GAIT UP GO Hızlı Başlangıç Kılavuzu - Sayfa 3

Tıbbi Ekipman Gait up GAIT UP GO için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Gait up GAIT UP GO 12 sayfaları. Medical device indicated for mobility and physical condition parameter assessment

Sayfayı Yazdır
To charge the Physilog6 sensor device, the following materials are needed:
✓ Physilog 6 sensor device
✓ USB cable (included in the packaging)
✓ Computer or Mobile Phone Charger (Refer to the IFU for specifications of compatible Mobile Phone
Chargers)
Charging method
Plug one end (UCB-C end) of the included USB charging cable into the Physilog6 sensor accessory and
the other (USB-A end) into a computer or a compatible mobile phone charger.
Note: The first time the Physilog6 sensor device is charged, allow it to charge for at least X hours, even if
the indicator light shows a full charge. The battery cannot overcharge.
Note: Physilog6 sensor device provides X hours of recording with Gait Up GO from a full charge under
normal operating conditions.
Light indicators related to battery charging
White blinks
Green shines
Red shines
© 2020 Mindmaze SA & Gait Up SA. All Rights Reserved. MindMaze, Gait Up, Gait Up GO the Mindmaze LOGO, the Gait Up LOGO and Physilog are trademarks or registered trademarks of
MindmazeHoldingSA.
Charge Physilog6 Battery
•
Device charging
•
Device fully charged
•
Error
blinking
shining