Gait up Physilog 6S Kullanıcı Kılavuzu - Sayfa 13

Tıbbi Ekipman Gait up Physilog 6S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gait up Physilog 6S 18 sayfaları.
Ayrıca Gait up Physilog 6S için: Hızlı Başlangıç Kılavuzu (6 sayfalar)

Sayfayı Yazdır

3D orientation

3D orientation of the sensor is calculated on-board during the measurement when in streaming

mode. The Matlab function to read the .BIN file has the option to output the quaternions and

Euler angles.

7. Troubleshoot

Reset

The reset is the manipulation which can be done if the Physilog® is not working properly. To do

a reset, hold the main button for 5 seconds. The LED blinks red/orange and then stops. If the

problem persists, fill out the contact form on the support page ( w ww.gaitup.com/support ) or

write an email to: [email protected]. Please indicate Physilog® serial number and describe

the problem in as much detail as possible (number of red blinks, last manipulation, firmware

version etc.).

LED indications

Physilog 6S user manual v1.0.0 Date: 08.01.2021