Gait up PhysiGait Lab Kullanıcı Kılavuzu - Sayfa 8

Ölçüm Cihazları Gait up PhysiGait Lab için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gait up PhysiGait Lab 18 sayfaları. User manual and outcome parameters

Sayfayı Yazdır

4.1

Gait Analysis options

The "Options" button allows to expand the window to show the available options for the gait

analysis which are briefly explained here.



To analyse forward gait without extrinsic

variations, you can exclude a chosen number of

the first and last cycles and the turns. We

recommend to discard two steps for initiation and

termination (Yuancheng J. et al. 1993).



For foot clearance analysis, the shoesize (from

heel to tip) needs to be specified in cm. Make

sure to measure this parameter if you are

interested in clearance parameters.



An Excel file and/or a pdf report can be

generated by the software. The pdf gives the

statistics of all the parameters and the excel file

provides in addition the values per cycle. The pdf

report can be generated in several languages.



At the bottom part you can add information about

the subject performing the gait test and

additional Remarks appearing at the top of the

pdf report.

5. Practical Considerations

5.1

Charging Physilog

The Physilog®5 is charged via the microUSB port. Plug the microUSB connector of the

delivered cable to the Physilog®5. Plug the USB connector to a Computer or Charger

(voltage specifications: 5V, 100mA). Physilog®5 must be turned off for charging. Do not

charge Physilog® when room temperature is outside of range 0°C to 45°C.

Low battery level is indicated by orange blinking during measurement or if the Physilog®

blinks rapidly 3 times red when starting and doesn't start the recording. When the Physilog®

is discharged, plug it for charging for at least 30 minutes before use. An estimation of the

battery level of the Physilog®5 can be obtained inside the Android companion application

(free to download from www.gaitup.com/support).

5.2

Physilog

The configuration of Physilog®5 can be modified using the Research ToolKit software or the

companion Android Application. This allows to optimise the sensor settings for different

PhysiGait Lab user manual v1.3.1 Date: 29.04.2019

5 configuration for gait measurements

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760